Overview
Conventional acoustic sounders SAW-6101 are designed for acoustic signalization of fire with tones. There is a possibility of acoustic synchronization of several sounder working in one acoustic area. They are dedicated for operation with all type of control panels with appropriate power supply output.
Design
Electronic circuits with piezoelectric sounder are fitted into red housing made with flame retardant material. The sounder is installed in G-40S base which is made with the same material and which is a kit with the sounder. There is a screwless connector inside the base for connection of wires. There is six connectors: two for power supply cable, synchronization and two for optional external switch for switching off the sounder.
Type | acustic, low current |
Installation | internal |
Version | conventional |
Supply voltage | (non-addressable) 16VDC - 32.5VDC |
Current consumption from external power supply | ≤ 50µA with 24 VDC supply with 24 VDC supply |
Power consumption in alarm mode | < |
Sound level | to 103dB |
Max. wire cross section | 2.5mm² |
Single flash time | tb=0.15s |
Emitted light colour | Acc. to approval certificate: red |
Wire type of detection/alarm/supply line | According to standards, cross section according to PN-EN 54-23 from 0.28 mm² to 1.5mm² |
Operating temperature range | from -25°C to 55°C |
Housing ingress protection | IP 21C |
Dimensions | Ф 115x71 mm |
Weight | ok 220g |
Other parameters | acc. to PN-EN 54-3 |